Changing The Fan Speed - Philips HU4805 User Manual

Changing the fan speed

Auto
The auto mode uses the digital
sensor to constantly monitor the air
humidity. It turns your humidifier on
and off whenever needed to ensure
the humidity level is constantly at the
right level. The default humidity level
of the auto mode is set at 50RH%, but
you can change it to the humidity level
you need under the auto mode. Next
time you switch on the humidifier, it
will remember your last set humidity
level, unless you have removed the plug
from the wall outlet or there is a power
interruption. In this case the default
humidity level is set at 50RH% again.
1
Press the speed button
the auto mode (fig. h).
» The AUTO speed light goes on.
Tip
•
When the desired humidity level is
reached, the humidifier changes to a
lower fan speed automatically.
•
In AUTO mode, the fan speed changes
between (low)and
to select
(normal).
Manual
You can manually select the desired fan
speed.
1
Press the speed button
more times to select the desired fan
speed (AUTO,
(high)) (fig. i).
» The selected fan speed light
goes on.
Tip
•
When the desired humidity level is
reached, you can select a lower fan speed.
However, if the desired humidity level is
not reached, you can select a higher fan
speed to humidify the air more quickly.
Note
•
Excess humidity in a room can cause
water condensation on windows and
some furniture. If this happens, lower the
fan speed or turn the humidifier OFF.
Sleep mode
In sleep mode, the humidifier operates
quietly with dimmed light for your
undisturbed sleep.
1
Press the speed button
more times to select sleep mode
(fig. j).
2
To change to another fan speed,
simply press the speed button
again.
Note
•
Sleep mode only works at speed
•
In sleep mode, the red indicator does
not blink, but remains on.
•
In sleep mode, you can only set the
timer; the humidity level cannot be set,
and the humidity light is off.
one or
(low), (normal) or
one or
(low).
EN 9