Advertisement
③ Please press the SET button.
④ Up to 15 letters can be used for the ID.
-
Please move the cursor to the letter you wish to choose by using the UP and
DOWN button.
-
Select an ID from A,B~Y,Z, a,b~y,z, 0,1~8,9 by using the UP, DOWN,LEFT and
RIGHT buttons.
-
Please lock in the letters by using the SETUP button.
When the letter is locked in, the cursor moves to the next space.
-
Please repeat the above to input the ID.
Note) If the wrong name has been input.....
If you press the SETUP button after moving the cursor to CLR, all the letters will be erased.
If you want to correct a letter, please move the cursor to the arrow at the bottom left of the
screen and press 'SET'.
Please position the cursor above the letter you wish to correct, and then move the cursor
onto the letter you wish to choose and press the SETUP button.
- When a name has been chosen, please select a position for the name display.
▪ Please move the cursor onto 'POS' and then press the SETUP button.
19
Advertisement
