Specification - LG 32LS3510 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LP24B chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Model General Specification
No. Item
1. Market
2. Broadcasting system
3. Channel Storage
4. Receiving system
5. Video Input
6. Component Input
7. USB Input
8. AV Audio Output
9. D-SUB INPUT
10. HDMI Input
11. Audio Input (1EA)
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
NON EU
1) PAL/SECAM B/G/D/K
2) PAL-I/II
3) NTSC-M
PAL NTSC
E2-C69 2~78
S21~S47 1~71
Upper Heterodyne
PAL, SECAM, NTSC
Y/Cb/Cr, Y/Pb/Pr
MP3, JPEG
RF/AV/HDMI Audio Output
S/W Upgrade Only
HDMI-DTV, Only PCM MODE
AV&Component
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
China(DK)
C1~C62
S1~S41
Rear (1EA)
Rear (1EA)
Side(1EA)
Rear (1EA)
Rear (1EA)
Rear (1EA)
L/R Input(1EA)
- 6 -
Remarks
LGE Internal Use Only