Hp-Ib Status Keys I Indicators I Connector - HP 3326A Operating And Reference Manual

HP-IB Status
Self
Test
A self test is initiated by pressing the blue SHIFT key prior to the SELECT key. During
a self test, all indicators and display segments briefly illuminate, and a series of inter-
nal tests is initiated. After each internal test, PASS or FAIL followed by a test number
is displayed to indicate the test results. During a self test, the outputs are disabled.
-
HP-IB Example:
THE HP-IB STATUS KEYSIINDICATORSICONNECTOR
The HP-IB (Hewlett-Packard Interface Bus) Status keys and indicators are used during
remote operation. An overview of the HP-IB and a description of the HP 3326A HP-IB
characteristics is in Chapter II. Chapter Ill describes the HP 3326A commands unique
to remote operation and contains a complete list of the HP-IB commands.