HP 3326A Operating And Reference Manual page 48

L~near Frequency Sweep
Marker t o Center Frequency
The MKR
--
CF (MarKeR to Center Frequency) key centers the sweep band on the fre-
quency set for the marker, The MKR
-
CF key is selected by pressing the blue SHIFT
key prior to the CONT key. If either the sweep start or stop frequency exceeds the fre-
quency limits, the frequency band is reduced.
2 Channel Mode
The center frequency of each channel is set independently. The frequency range of
each channel is
0
to 13 MHz.
2 Phase or Pulse Mode
The center frequency of both channels is set to the same value by a change in the
center frequency of either channel. The frequency range is 0 to 13 MHz.
2 Tone Mode
The channel A center frequency has the range of
0
to 13 MHz. The start and stop fre-
quencies of channel B tracks changes to the channel A start and stop frequencies to
maintain the current offset. The channel B center frequency can have up to a 100 kHz
offset from channel A providing the channel B start and stop frequencies are within
100 kHz of the channel A start and stop frequencies.
HP-IB Example:
"CFM"