DeWalt DW802 Instruction Manual page 3

* Dressproperly. D o not wearlooseclothingor jewelry.
Contain long hair.
Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long hair
can be caught in moving parts. Air vents often cover moving
parts and should also be avoided.
* Avoid accidental starting. Be sure switch is off before
plugging in. Carrying tools with your finger on the switch or
plugging in tools that have the switch on invites accidents.
* Remove adjusting keys or wrenches before turning the
tool on. A wrench or a key that is left attached to a rotating part
of the tool may result in personal injury.
* Do not overreach. Keep proper footing and balance at all
times. Proper footing and balance enables better control of the
tool in unexpected situations.
* Use safety equipment. Always wear eye protection. Dust
mask, non-skid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.
TOOL USE AND CARE
* Use clamps or other practical way to secure and support
the workpiece to a stable platform. Holding the work by hand
or against your body is unstable and may lead to loss of control.
* Do not force tool Use the correct tool for your application,
The correct tool will do the job better and safer at the rate for
which it is designed.
* Do not use tool if switch does not turn it on or off. Any tool
that cannot be controlled with the switch is dangerous and
must be repaired.
* Disconnect the plug from the power source before making
any adjustments, changing accessories, or storing the
tool Such preventative safety measures reduce the risk of
starting the tool accidentally.
* Store idle tools out of reach of children and other untrained
persons. Tools are dangerous in the hands of untrained users.
* Maintain tools with care. Keep cutting tools sharp and
clean. Properly maintained tools, with sharp cutting edges are
less likely to bind and are easier to control.
* Check for misalignment or binding of moving parts, break-
age of parts, and any other condition that may affect the
tools operation. If damaged, have the tool serviced before
using. Many accidents are caused by poorly maintained tools.
* Use only accessories that are recommended by the manu-
facturer for your model Accessories that may be suitable for
one tool, may become hazardous when used on another tool.
SERVICE
* Tool service must be performed only by qualified repair
personnel Service or maintenance performed by unquafified
personnel could result in a risk of injury.
, When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section of
this manual Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of electric shock or
injury.
Additional Specific Safety Instructions
for Grinders
. Always use proper guard with grinding wheel. A guard pro-
tects operator from broken wheel fragments and wheel contact.
* Accessories must be rated for at least the speed recom-
mended on the tool warning label Wheels and other acces-
sories running over rated speed can fly apart and cause injury.
Accessory ratings must be above fisted minimum wheel speed
as shown on tool nameplate.
* Hold tool by insulated gripping surfaces when performing
an operation where the cutting tool may contact hidden