Controls And Indicators - Hoover DYC 890NB Instruction Book

Control Panel and Indicator Lights
Programme Selector – Select the required programme
Time Selection Button – Allows the user to change duration of the programme selected by
Programme Selector. It can be used only with the selection of: Mix&Dry, Shirts and Time
Programmes
Delay Start Button – Allows the user to delay the start of the drying cycle (see details of
Operation )
Acrylic and Synthetic Button – When pressed the
illuminated
Anti- Crease Button – Allows the user to select a post drying anti-crease cycle.
Start/Pause Button – Press to commence/ to pause the selected drying programme.
Memo Button – Allows user to record the programme by pressing simultaneously the Anti-
Crease and the Acrylic Synthetic buttons for 3 seconds, after 2 minutes duration of the chosen
programme/option
Filter Care indicator
Empty Water indicator
Program Display – Related indicator lights when a auto programme has been selected.
- Indicator will come on when the eco programme has been selected.
Refresh – The indicator lights up when the programme starts the cool down stage.
SELECTING THE PROGRAMME

CONTROLS AND INDICATORS

Empty Water
Programme
Time Selection
Selector
Button
– lights when the filter needs cleaning
– lights when the water container is full
This machine has a special Sensor Dry to help you choose your
preferred programme simply by selecting the level of dryness
wanted.
For small loads and pre-dried clothes, please use a Timing
programme and select "Delicate fabrics" button to lower the
temperature inside the drum.
If the Sensor does not detect any item, this Dryer will work for only
10 minutes before starting the Cool down phase.
If the load is too big or too wet, this Dryer will automatically work for
3 hours and then start the Cool down phase.
At the end of each programme, there is always the Cool Down
phase: it is a cool-air refresh phase of around 15 minutes.
Filter Care
Indicator Indicator
Delay Start
Button
default indicator will fade and
Program
Start/Pause
Display
Acrylic Synthetic
Anti-Crease
Button
Button
Button
will be
EN 9