KS-AX6700
5.
Remove the 6 screws E retaining the panels on both
sides of the main unit.
6.
Remove the 13 screws F attaching the main P.C.
board to the bottom of the main unit.
(The GND wire that protrudes from the main
P.C.board must be re-installed to its original
position during re-assembly.)
7.
To remove the wire ass'y, lift up the main P.C. board
a little.
1-6
E
Fig. 5
E
Fig. 6
F
F
Fig. 7
(Side view)
Fig. 8
Rear panel
Front panel
GND wire
Main P.C. board
Main P.C. board
Wire assemb'y