Table of Contents
Advertisement
Road Map
It is recommended that you first familiarize yourself with the VISO II
ROAD MAP which is a very helpful tool when using the VISO II for the first time.
The ROAD MAP comprises four areas:
• Backlight S etup Area (see page 39)
• Pro le Area (see page 51)
• S etup Area (see page 19)
• Logbook Area (see page 43)
18
VISO II Settings
• Preset jump counter
• R eset jump counter
• T urn the VIS OII O FF
• P adlock window
To enter the Setup Area
Perform ACCESS on
or
. Then hold
Performing ACCESS:
1 Press
or
and release quickly. The padlock icon turns ON and OFF
2 When the padlock icon turns ON again, immediately press the same button and
keep it pressed (padlock turns OFF)
3 When the padlock icon turns ON again, release immediately
20
VISO II Settings
Alti-Meter / Speed-Meter Selector
Alti-Meter/Speed-Meter • Feet/ Meter when set to Alti-Meter • Mph/ Kmh when set to S peed-Meter • Altitude
offset • Dive T ype • T rue Airspeed (T AS )/ S kydiver's Airspeed (S AS ) • S et current year • S et current date • S et
current time • Preset jump counter • R eset jump counter • T urn the VIS OII O FF • P adlock window
Alti-Meter / Speed-Meter
The VISO II can be set to function either as an Alti-Meter or as a Speed-Meter.
Press
or
mode.
The active selection flashes.
to save setting and enter the Feet/Meter selector.
Press
22
> 5 seconds
to toggle between Alti-Meter or Speed-Meter
VISO II Settings
The VISO II can be customised to your personal settings. Your settings will be stored
and recalled also after replacing batteries. When you first get the VISO II, we recom-
mend you to go through the SETUP Selector to customise the VISO II settings.
SETUP Selector
In the Setup Area the following options can be selected:
• Alti-Meter/ S peed-Meter
• Feet/ Meter when set to Alti-Meter
• Mph/ Kmh when set to S peed-Meter
• Altitude offset
• Dive T ype
• T rue Airspeed (T AS ) / S kydiver's Airspeed (S AS )
• S et current year
• S et current date
• S et current time
VISO II Settings
General note:
The VISO II goes out of ACCESS and back to the Main Window if no button has been
pressed within 15 sec.
ALL functions (except Power ON) can be performed ONLY when the VISO II is in ACCESS mode.
To leave the Setup Area
Wait until the display times out, or press
shows. Then press
or
to exit.
Padlock Window
VISO II Settings
Feet/Meter Selector
Alti-Meter/ S peed-Meter • Feet/Meter when set to Alti-Meter • Mph/ Kmh when set to S peed-Meter • Altitude
offset • Dive T ype • T rue Airspeed (T AS )/ S kydiver's Airspeed (S AS ) • S et current year • S et current date • S et
current time • Preset jump counter • R eset jump counter • T urn the VIS OII O FF • P adlock window
Feet/Meter
Press
or
to toggle between Feet/Meter.
The active selection flashes.
Press
to save setting and enter the Mph/Kmh selector.
Not e: Jump data is continuously stored in both feet and meter.
At any time stored information may be displayed in either unit
of measurement by selecting the respective mode.
repeatedly until the Padlock window
19
21
23
Hide quick links:
Advertisement
Table of Contents
