Veichi Electric AC70E-S2-R40G Manual page 23

Input signal respond mode
F-07
selection
Terminal running control mode
F-08
1 step speed setting 1X
F-09
LED unit digit: Free stop terminal
recover mode
0: Recover to original command with
speed search function.
1:Don't recover to original command
after free stop terminal disconnecting.
2: Recover to original command
without speed search function.
LED ten digit: UP and DW terminal
control starting frequency setting
0: Runs with UP/DW terminal
adjusting without save the frequency
record after power loss.
1: Run to last stop moment frequency
and then perform UP/DW adjusting.
2: Runs to preset frequency F-70
first, and then execute UP/DW
adjusting.
LED hundred digit: STOP/RESE of
keypad effective range selection.
0: STOP/RESE key valid only when
under keypad control
1: STOP/RESE key valid under any
run command source
LED thousand digit: Terminal
running mode selection after fault
reset
0: Start inverter running directly after
power on in terminal control mode
1: Stop first and then start in terminal
control mode.
LED unit digit Terminal control
mode selection
0: Standard running control mode
1: 2wire running control mode
2: 2 wire control mode 1
3: 3 wire control mode 2
4: 3 wire control mode 3
5: 3 wire control mode 4
LED ten digit Reserve
LED hundred digit Reserve
LED thousand: Reserve
23
1001 93
0000 94
●
30.00Hz
96
207H
208H
209H