Required Tools - Samsung RF28HM SERIES User Manual

<RF25HM**>
t -
56 1/4" I 11 8/8 '_
, (1430 mm) (300 mn_)
i. 32 3/4" (830 turn) "1
Each measurement based on the design
dimension, so it may differ depending on
the measuring method.
/_ CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to 'Adjusting the doors' on page 14.
Flat-blade screw Control Lever
driver(-)
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor. This surface
should be strong enough to support a fully loaded
refrigerator. To protect the finish of the flooring, cut
a large section of the cardboard carton and place
it under the refrigerator where you are working.
When moving a refrigerator, you need to pull and
push it straight forwards or back. Do not wiggle it
from side to side.
ACCESSORIES AND
REQUIRED TOOLS
The following accessories are included with your
refrigerator:
Hex wrench Fastener
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
(_A_3_ ======_
Philips Flat--blade Socket wrench
screwdriver(+) screwdriver(-) (13/32")(10 mm)
Allenwrench
Pliers
(3/16") (5 mm)
Engl sh - 10