Ferroli RHV R134a Instruction Manual page 24

After timer type set you have to go to SETUP line to actually setup the start, the end, the unit mode and water temp setup for
each time band.
SETUP: according to the different timer type selected on the display there will be different lines:
SETUP
F1
Monday
F2
Twesday
Wednesday
TIMER TYPE = 1 (Weekly)
SETUP
F1
Weekly
F2
IMPORTANT NOTE
For the chiller working, the time scheduling setup is always priority on the setup done by keyboard control, except the
remote ON/OFF by digital input
The digital input remote ON/OFF -IF ENABLED- is always priority on time scheduling:
If the unit is in OFF mode by remote (remote ON/OFF) and the time scheduling are enabled the unit remains OFF. When
you switch ON the unit by remote ON/OFF the unit starts to work following the time scheduling setup.
Time scheduling management is disabled even if the configuration mode is activated.
For instance for TIMER TYPE = 0 (daily) in submenu SETUP you have to move on MONDAY line then press ENTER and so
setup for each time band the parameters showed:
TIME BAND 1 ENABLE FLAG: this parameter enable/disables the first time band
TIME BAND 1 HOUR: this parameter allows the setting of the start hour of the first time band
TIME BAND 1 MINUTES: this parameter allows the setting of the start minutes
(from 0 to 59 inside the time band hour) of the first time band.
24
MONITORING SYSTEM - User setting
TIMER TYPE = 0 (Daily)
01/03
SETUP
F1
Thursday
F2
Friday
Saturday
01/01
02/03
F1
F2
TIMER TYPE = 3 (Week-end 5+2)
SETUP
F1
Monday - Friday
F2
Saturday - Sunday
F1
F2
F1
F2
F1
F2
SETUP 03/03
Sunday
01/01
MONDAY 01/24
Time band 1
enable flag
SI
MONDAY 02/24
Time band 1
HOUR
15 h
MONDAY 03/24
Time band 1
MINUTES
25 Min