Ferroli RHV R134a Instruction Manual page 20

PROP. BAND
Using the MENU joystick buttons, select the PROP. BAND parameter.
This parameter is set by default to 2.0 °C.
RECOVERY 01/02
F1
ENABLE YES
F2
SETPOINT 41.0°C
PROP BAND 2.0°C
To change this set-point value, press "Enter" twice:
the value 2.0 °C will start flashing
- change the value as required using the "Up/Down"buttons.
After changing the value, press "Enter" to confirm and then press "Left" to exit.
REMOTE
Allows the Recovery function to be enabled from a remote digital input.
Using the MENU joystick buttons, select the REMOTE parameter.
RECOVERY 01/02
F1
ENABLE YES
F2
SETPOINT 41.0°C
PROP BAND 2.0°C
To change the YES/NO status press "Enter"twice:
the value will start flashing
- change the value as required using the "Up/Down"buttons.
After changing the value, press "Enter" to confirm and then press "Left" to exit.
20
MONITORING SYSTEM - User setting
F1 RECOVERY
REMOTE
F2
RECOVERY PROP BAND
F1
F2
2.0°C
02/02
YES
REM RECOVERY ENABLE
F1
F2
YES