Setting The Operating Set Point - Ferroli RHV R134a Instruction Manual

SETTING THE OPERATING SET POINT

From the main screen, press the "Up" and "Down" buttons to access Set Point 1 and press ENTER: the "Setpoint 1 chiller
mode" screen will appear. Press ENTER to make the temperature value 7.0°C blink and change it with the "Up" and "Down"
buttons as required. Press ENTER to confirm.
To return to the main screen, press the
To modify the Band 1 proceed in a similar manner to the one described for setting the operating SET POINT.
IMPORTANT NOTE:
In "time proportional regulation" is reccomended to keep the band=1°C.
MONITORING SYSTEM - User setting
LEFT (ESC) button several times:
LEFT (ESC)
F1
Power 70%
F2
Set Point 1 7.0°C
Band 1 1.0°C
CH SET 1 01/01
F1
Setpoint 1
F2
chiller mode
7.0°C
15