Bios Settings; Bios Setup Utility; Starting The Bios Setup; When A Problem Occurs - Kennmex K790 series User Manual

7. BIOS Settings

7.1 BIOS Setup Utility

The BIOS setup defines how the system is configured. You need to run this program the first time
you configure this product. You may need to run it again if you change the configuration.
You need to connect a PC keyboard to the keyboard connector to run the BIOS setup utility.

7.2 Starting the BIOS Setup

Turn on or reboot this product.
Press the DEL key immediately after the product is turned on, or press the DEL key when the
following message is displayed during POST (the Power on Self-Test)
Press DEL to enter SETUP.
The main menu of the BIOS setup is displayed.
If the supervisor password is set, you must enter it here.

7.3 When a Problem Occurs

If, after making and saving system changes with the Setup utility, you find that this product no
longer boots, start the BIOS setup and execute the following
Load Optimized Defaults

7.4 BIOS Main Menu

When the BIOS Main Menu is displayed, the following items can be selected. Use the arrow keys to
select items and the Enter key to accept and enter the sub-menu.
Note: The BIOS setup menus shown in this section are for reference only and may not exactly
match the items of your BIOS version.
.
- 58 -