Getting Started - Swivl Robot User Manual

Getting Started

Step 1: Determine which grip best fits your device.
There are three shims that hold your mobile device. Each shim has a different thickness. Select a shim and test on edge of
mobile device. Fit should be snug with no force. (For devices with large cases, a mount anything kit is available for purchase.)
A B
First, determine which shim best fits your device.
Step 2: Power on the device.
Lift the back flap on the base to remove the marker. Press and hold the power button on base. Then hold the power button on the
marker for 3-4 seconds. Both lights should turn green, meaning paired. If the top light on the marker, and the right light on the base
are both red, you may need to pair your marker with the base.
Swivl User Guide
C
Next, push removable grip holder left and lift to remove.
Finally, insert shim into grip holder and place in base.
How to pair a marker:
Step 1: Press and hold both power and sync
button simultaneously until power LED on
base flashes. Then release.
Step 2: Press and hold
both power and check-
mark button simultane-
ously until top LED on
marker flashes green.
Then release. Pairing is
complete.
5