Swivl Robot User Manual page 4

LED Status Guide
Solid red
Bluetooth not connected
Flashing red
Bluetooth ready to pair
Solid green
Bluetooth connected
Charging
Plug the charging cable into bottom of the base and place marker in the base dock to charge. You should see an LED light when
plugged in. The battery life of the base and the marker can be checked in the Swivl Capture App Settings. (Mobile device must
be connected to the base via Bluetooth.) When the base is plugged in, the USB port in the back of the base can also be used to
charge your mobile device.
Flashing Green - Base charging
Flashing Red - Marker charging
Solid Green - All charged
Flashing Red and Green - Both marker and base charging
Swivl User Guide
Solid red
On, unconnected to Marker
Flashing red
Low battery (both LEDs)
Solid green
On, connected to Marker
Solid red
On, unconnected to
Base
Flashing red
Low battery
Solid green
On, connected to Base
Solid red
Recording
4