4. Managing Tests and Templates
Introduction
Opening the Template Editor
72A-2570-01 Rev. K 07/2011
This chapter describes the templates provided with SFRA 5.2 and explains
how to use them. It contains the following sections:
•
"Introduction" on page 4-1
•
"Opening the Template Editor" on page 4-1
•
•
•
SFRA software provides preconfigured templates in the Settings folder. A test
template provides a list of recommended tests for a transformer. You can edit
these template files, replace them, or import other templates using a simple
procedure to merge template files (see
on page
5-14).
The Template Editor enables you to create, edit, review, and delete test
templates. Test templates are a means of grouping tests for a particular
transformer design and are a flexible way to specify tests for use in the field.
You can associate a template with a number of transformers or create it for
future reference and not associate it with any transformer.
For information about the specific contents of each template, see
"Test Templates."
To open the Template Editor:
"Merging Settings Files"
.
Appendix B,
4-2).
4-1