Location Of User's Control - Sharp 32SF56B Service Manual

32SF56B
LOCATION OF USER'S CONTROL(32SF56B)
Front Panel
POWER
Press → On.
Press again → Off.
REMOTE CONTROL
SENSOR
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
Basic Remote Control Functions
POWER
Press
Press again
REMOTE KEYPAD (0 – 9)
Sets the channel.
FLASHBACK
Returns to previous channel.
• (DOT)
Sets the channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
( + ) Increases sound.
( – ) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press
Press again
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will
be for TV and VCR control.
In CATV/DVD position, signals sent
will be for cable TV converter and
DVD control.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark
display on the remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from
their actual appearance.
On.
Off.
Accesses MAIN MENU.
Exits MAIN MENU.
VOLUME UP/DOWN
+
( ) Increases sound.
( ) Decreases sound.
Infrared Transmitter Window
DISPLAY
Press
for 4 seconds.
POWER
DVD Press again
TV
VCR DISPLAY INPUT
• Temporarily displays receiving
channel when in Closed Caption
1 2 3
mode.
4 5 6
INPUT
Press
7 8 9
INPUT 1 mode.
FLASHBACK ENTER
Press twice
0
video INPUT 2 mode.
PERSONAL PREFERENCE
Press 3 times
A B C D
video INPUT 3 mode or
CH COMPONENT mode.
VOL VOL
ó + Press 4 times
CH
the original TV mode.
MENU MUTE
ENTER
CATV TV
• Used to confirm the channel
selection and Personal Preference
DVD VCR
channel.
REW PLAY FF
• Used in some instances where a
Cable Converter Box requires an
CH/SKIP
PAUSE STOP REC
"enter" command after selecting
channels, when using the REMOTE
KEYPAD button.
CHANNEL UP/DOWN
( ) Selects next higher channel.
( ) Selects next lower channel.
TV CATV VCR DVD • Moves the "
screens.
MUTE
Press
Press again
4
INSIDE DOOR
VIDEO/AUDIO IN 2
TERMINALS
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
( ) Selects next lower channel.
"
Displays receiving channel
Removes display.
Switches to external video
Switches to external
Switches to external
Switches back to
" mark on the MENU
Mutes sound.
Restores sound.