Sony Cyber-shot DSCWX220 Help Manual page 314

Help Guide
How to Use
Digital Still Camera
DSC-WX220
Back Back to Top
Charging the battery pack
The supplied AC Adaptor is dedicated to this product. Do not connect with other
electronic devices. Doing so may cause a malfunction.
Make sure to use a genuine Sony AC Adaptor.
If the product's Charge lamp flashes while charging, remove the battery pack being
charged, and then insert the same battery pack firmly back into the product. If the
Charge lamp flashes again, this may indicate a faulty battery or that a battery pack
other than the specified type has been inserted. Check that the battery pack is the
specified type.
If the battery pack is the specified type, remove the battery pack, replace it with a new
or different one and check that the newly inserted battery is charging correctly. If the
newly inserted battery is charging correctly, the previously inserted battery may be
faulty.
If the Charge lamp flashes even if the AC Adaptor is connected to the product and the
wall outlet (wall socket), this indicates that charging has stopped temporarily and is on
standby. Charging stops and enters standby status automatically when the temperature
is outside of the recommended operating temperature. When the temperature returns
to the appropriate range, charging resumes and the Charge lamp lights up again. We
recommend charging the battery pack in an ambient temperature of between 10°C to
30°C (50°F to 86°F).
Print
304