Sony Cyber-shot DSCWX220 Help Manual page 280

Help Guide
How to Use
Digital Still Camera
DSC-WX220
Back Back to Top
WPS Push
If your access point has the WPS button, you can register the access point to this product
easily by pushing the WPS button.
1. MENU →
2. Press the WPS button on the access point you want to register.
Note
[WPS Push] works only if the security setting of your access point is set to WPA or
WPA2 and your access point supports the WPS button method. If the security setting is
set to WEP or your access point does not support the WPS button method, perform
[Access Point Set.].
For details about the available functions and settings of your access point, see the
access point operating instructions or contact the administrator of the access point.
A connection may not be enabled depending on the surrounding conditions, such as the
type of wall material or if there is an obstruction or poor wireless signal between the
product and access point. If that happens, change the location of the product or move
the product closer to the access point.
(Wireless) → [WPS Push].
Print
Go to Page Top
270