Table of Contents
Advertisement
Downrod (continued)
www.CasablancaFanCo.com
1.888.227.2178
Note: The adapter cover is not
used for low-profile mounting.
3/8"
8"
KEEP!
The wires can be cut, but
Slide the adapter cover onto
Remove the pre-installed
Tighten the setscrew
leave at least 8" extending
the downrod, then hand
setscrew so that the downrod
with pliers. DO NOT
from the top of the downrod.
tighten the downrod (at least
can be inserted.
HAND TIGHTEN.
4-5 full turns) until it stops.
8"
3/8"
If the setscrew is not tightened
securely, the fan may fall.
8
M8501-01 • 02/15/16 • © Casablanca Fan Company
Advertisement
Table of Contents
