New And Changed Information - Cisco MDS 9000 series Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

New and Changed Information

This document provides release-specific information for each new and changed feature for Cisco I/O
Accelerator. The Cisco MDS 9000 Family I/O Accelerator Configuration Guide applies to Cisco NX-OS
and Fabric Manager Release 4.2(1) and later.
To check for additional information about this release and to determine if this release supports I/O
Accelerator, refer to the Cisco MDS 9000 Family Release Notes and Cisco Fabric Manager Release
Notes available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.html
Table 1
Accelerator Configuration Guide, each supported NX-OS release for the Cisco MDS 9500 Series, with
the latest release first. The table includes a brief description of each new feature and the release in which
the change occurred.
Table 1 New and Changed Features for Cisco I/O Accelerator
Feature GUI Change
ISAPI enhancements -
IOA is supported with -
IVR
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
summarizes the new and changed features as described in the Cisco MDS 9000 Family I/O
Description
Added information about ISAPI
enhancements.
Added IVR flows support with IOA 5.0(1a)
Changed
in
Release
5.0(1a)
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
Where Documented
Chapter 4, "Configuring
IOA Using the CLI"
Chapter 3, "Deployment
Considerations"
ix