Cisco MDS 9000 series Configuration Manual page 82

Configuring Clusters
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Select Cluster in the navigation pane and then click the Add icon on the toolbar.
Step 1
You see the IOA Manager window as shown in
Figure 5-11
Enter the Cluster name, and then click OK.
Step 2
You see the add Cluster name dialog box as shown in
Figure 5-12
Enter the Cluster name and then click OK.
Step 3
You see the select switch dialog box as shown in
Figure 5-13
Select a switch from the drop-down list, and then click OK.
Step 4
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
5-8
IOA Manager - Add Clusters
Add Cluster Name Dialog box
Select Switch Dialog Box
Chapter 5 Configuring IOA Using Fabric Manager
Figure 5-11.
Figure 5-12.
Figure 5-13.
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)