Power-On Messages - Beam Iridium RapidSAT LBT Installation & User Manual

Power-ON Messages

Once the phone is powered on, you may see one of the
following messages.
Messages Message Description
Searching... The phone is attempting to
establish communications with
the satellite network.
Registering... The phone is registering with
the network. When the process
is complete, you will see
Registered.
Check Signal The phone is unable to establish
registration with the satellite
network. Move to a location
with a clear unobstructed view
of the sky.
Invalid Account Contact the service provider.
Enter Phone The phone was locked after the
Unlock Code last use. Enter the four-digit
unlock code and press OK to
proceed.
22
Enter PIN Enter the four-to-eight-digit SIM
card PIN code provided by the
service provider and press OK
to proceed.
Insert Card Power off the phone, make
sure the SIM card is inserted
completely, and then power the
phone on again.
Check Card The SIM card is damaged or
inserted the wrong way.
Blocked If the SIM card PIN code is
incorrectly entered three times
in a row, the phone becomes
blocked. Use **05* to proceed
to enter the PUK code.
! Blocked If the SIM card PIN2 code is
incorrectly entered three times
in a row, some features (e.g.,
Fixed dialling) become blocked.