Table of Contents
Advertisement
Operating RapidSAT LBT
Cup and Uncup the Intelligent Handset
1.
During a call, the handsfree speaker and
microphone are the default audio device unless
the Intelligent handset is removed from the
hang-up cup.
2.
Please refer to the image on how to remove the
handset from the hang-up cup.
Privacy mode
•
To switch to a private call, release the Intelligent
handset from the hang-up cup. When the
Intelligent handset is in use, the speaker and
microphone operation is disabled.
•
To return to speaker and microphone handsfree
mode, replace the handset into the cup.
•
The call can be switched between privacy and
handsfree mode anytime.
Operation of the RapidSAT LBT
1.
Switch the Power ON/OFF switch to ON position
(the green LED on the switch is ON). The phone
and RapidSAT LBT will automatically power up.
2.
Wait for the Intelligent Handset to register on
the network.
3.
You are now ready to make and receive calls.
18
Making Calls
Making a Voice Call
•
Ensure that external antenna is placed in
maximum view of the sky.
•
To make a voice call, check that the Intelligent
Handset is "registered", then dial the number on
the keypad.
•
Progress tones will be heard from the speaker as
the call connects.
•
The volume of the call can be adjusted using
the volume control buttons on the front of the
Intelligent handset.
Receiving a Voice Call
Incoming calls can be answered by pressing the green
'OK' key on the Intelligent handset.
Hanging-Up a Call
To end a call, press the green 'OK' button or the red 'C'
Clear Button on the keypad to hang-up the call.
Data Communications via USB Cable Port
The RapidSAT LBT provides the convenience of
accessing Iridium data services while the phone is
docked in the cup. You should consult the service
provider for full details on the availability of this service
with the account.
Advertisement
Table of Contents
