Assembly And Use Of The Bowl - Ninja BL201 Owner's Manual

Assembly and Use of the Bowl

WARNING: Handle the Chopping Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Shaft
Or
Fig. 1 Fig. 2
It's best to add the liquid ingredients first and then the dry ingredients.
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface
such as a counter or table top.
3
Align and lower the bowl onto the motor base.
(Fig. 1) Handle should be aligned slightly to the left of
the "LOCK" symbol on the motor base.
4
Rotate the container clockwise as far as it will go to
lock in place. (Fig. 1)
5
Holding the desired attachment by the shaft, place it
onto the drive gear inside the container. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 2)
NOTE: The blade assembly will fit loosely on the drive
gear.
6 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pouring spout
cap and pour the ingredients in through the opening.
9 1-877-646-5288
Fig. 3 Fig. 4
PULSE
Fig. 5
7
Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl's handle. (Fig. 3)
8
Push down on the "PULSE" on the handle to start the
appliance. (Fig. 4)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
IMPORTANT: When using the dough blade assembly
or the dough paddle, hold the appliance to secure the
appliance to the counter or table top.
9
When you have reached your desired consistency, stop
pressing the lid handle and wait for the attachment to
stop turning.
10 To remove the lid, pull the lid handle up to a 90° angle.
Turn the bowl counter-clockwise to lift off the base.
(Fig. 5, Fig. 6)
CAUTION: Never insert your hands in the pitcher
as the blades are sharp. Always use a spatula to
dislodge food that has stuck to the sides of the
pitcher.
11 Make sure that the unit is unplugged when not in use.
REMOVAL
Fig. 6