29
Universal Serial Bus (USB)
The USB 2.0 port is a high-speed serial bus which allows you to connect USB
peripherals without taking up precious system resources.
BIOS utility
The BIOS utility is a hardware configuration program built into your computer's
BIOS.
Your computer is already properly configured and optimized, and you do not need to
run this utility. However, if you encounter configuration problems, you may need to
run it.
To activate the BIOS utility, press <F2> during the POST while the notebook PC logo
is being displayed.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then select
Boot from the categories listed at the top of the screen.
Enable disk-to-disk recovery
To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility, then
select Main from the categories listed at the top of the screen. Find D2D Recovery
at the bottom of the screen and use the <F5> and <F6> keys to set this value to
Enabled.