Listening To A Usb Device/Cd; Preparing A Usb Device/Cd - JVC NX-W5W Instruction Manual

Listening to a USB device/CD

Preparing a USB device/CD

To connect a USB device
USB memory
(not supplied)
USB cable
(not supplied)
The "USB" icon lights up after it is connected.
0
NOTE
Power is supplied to the USB device and the
0
device will be charged through the System when
the USB device is connected to the System.
CAUTION
Stop playback before disconnecting the USB
0
device. Disconnecting the USB device during
playback may cause damage to the files and file
system of the USB device.
You cannot send any data from the System to the
0
USB device.
18
To insert a disc
1
Set the source to "CD".
Remote control
2
Insert a disc.
Insert the CD with the label side facing the
same direction as the front of the System.
The CD will be inserted automatically when
0
you insert it in partially.
"READING" is displayed when the CD is
0
being read. Wait until the display
disappears.
To eject a disc
Main unit
Main unit
(Press repeatedly)