Advertisement
DO NOT operate the saw when you are tired or under the influence of alcohol, drugs or intoxicating medication.
When not in use switch off the saw and unplug from the power supply.
WARNING! Wear approved safety eye protection, ear defenders and, if dust is generated, respiratory protection.
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
Keep hands and body clear of the blade when operating the saw.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and unauthorised persons away from the work area.
Avoid unintentional starting and never leave the saw operating unattended.
DO NOT use the saw for a task it is not designed to perform and ensure operators are trained to use the saw.
DO NOT get the saw wet or use in damp or wet locations or areas where there is condensation.
DO NOT use the saw where there are flammable liquids, solids or gases such as paint solvents and including waste cleaning rags etc.
1.3
SpECIFIC SAW SAFETY RULES
Connect to a suitable extraction system. Failure to do so will result in the build-up of sawdust which could become a fire hazard.
Keep blade guard in place and operational.
WARNING! Before each use, check that the saw blade is secure and not worn or damaged.
Check workpiece to ensure that there are no nails or other items which may foul the saw blade.
Clamp the workpiece firmly against the fence.
Avoid subjecting the saw blade to excessive strain - never force the blade down. Maintain a controlled, steady progression.
Should the saw blade jam, switch the power off immediately to prevent damage to the motor.
Provide adequate support to the sides of the saw table for long or wide workpieces.
Always use the workpiece clamp provided if at all possible. if the workpiece can only be hand-held take extreme care.
DO NOT place yourself in an awkward operating position where a slip could cause your hand to move into the cutting blade.
DO NOT stand, or have any part of your body, in line with the path of the saw blade.
DO NOT hold what will become the off-cut (the waste part of the workpiece).
WARNING! DO NOT put hands anywhere near the blade whilst it is rotating.
WARNING! DO NOT attempt to free a jammed saw blade without first switching off or removing the plug from the mains power supply.
DO NOT cut metals or substances that may produce toxic dust. Saw must only be used to cut wood or wood derived substances and
plastics.
DO NOT attempt to cut round section wood.
DO NOT use solvent to clean plastic parts, it may damage them. Use a soft damp cloth only.
Store blades in a safe, dry childproof location.
LASER SAFETY. The SMS8, 10 and 12 utilise a Class ii laser that emits a low level of visible radiation (i.e. a wavelength of 650 nanometres)
which is safe for the skin but not inherently safe for the eyes. The Class ii emission limit is set at the maximum level for which eye protection is
normally afforded by natural aversion responses to bright light. Accidental eye exposure is therefore normally safe, although the
natural aversion response can be overridden by deliberately staring into the beam, and can also be influenced by the use of alcohol
or drugs.
WARNING! Do not look or stare into the laser beam as permanent eye damage could result.
DO NOT direct the laser beam at any person's (or animal's) eyes as eye damage could result.
DO NOT operate the laser level when you are tired or under the influence of alcohol, drugs or intoxicating medication.
Be aware that reflections of the laser beam from mirrors or other shiny surfaces can be as hazardous as direct eye exposure.
2. SpECIFICATIONS
Lightweight portable saws with aluminium base, chassis and machined aluminium table. Features sliding action, table extension wings and
work clamp. Laser guide enables user to accurately align cut line avoiding miscutting and wastage. Trigger control with safety catch provides
added user safety. Blade guard includes Ø35mm dust extraction port with removable dust-bag. Saw arm features ±45° mitre with positive stop
and 45° bevel for cutting compound mitres. Supplied with TCT saw blade. Saw arm latches closed for easy storage and transport.
model No:
Power Supply . . . . . . . . . . . . . . . . 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230V
Motor Power . . . . . . . . . . . . . . . . . 1600W . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800W . . . . . . . . . . . . . . . . . . . . . . . . . . .1800W
Blade Size . . . . . . . . . . . . . . . . . . 210 x 16mm . . . . . . . . . . . . . . . . . . . . . . 255 x 25mm . . . . . . . . . . . . . . . . . . . . . . .305 x 25mm
Blade Speed. . . . . . . . . . . . . . . . . 4800rpm . . . . . . . . . . . . . . . . . . . . . . . . . 4600rpm . . . . . . . . . . . . . . . . . . . . . . . . . .4200rpm
Positive Mitre Locks . . . . . . . . . . . 0°, 15°, 22.5°, 30°, 45° . . . . . . . . . . . . . . 0°, 15°, 22.5°, 30°, 45° . . . . . . . . . . . . . . .0°, 15°, 22.5°, 30°, 45°
Blade 90°/Mitre 0° . . . . . . . . . . . . 65 x 205mm . . . . . . . . . . . . . . . . . . . . . . 75 x 300mm . . . . . . . . . . . . . . . . . . . . . . .100 x 310mm
Blade 90°/Mitre 45° . . . . . . . . . . . 65 x 145mm . . . . . . . . . . . . . . . . . . . . . . 75 x 210mm . . . . . . . . . . . . . . . . . . . . . . .100 x 215mm
Blade 45°/Mitre 0° . . . . . . . . . . . . 35 x 205mm . . . . . . . . . . . . . . . . . . . . . . 40 x 300mm . . . . . . . . . . . . . . . . . . . . . . .55 x 310mm
Blade 45°/Mitre 45° . . . . . . . . . . . 35 x 145mm . . . . . . . . . . . . . . . . . . . . . . 40 x 210mm . . . . . . . . . . . . . . . . . . . . . . .55 x 215mm
Dust Extraction Port . . . . . . . . . . . Ø35mm . . . . . . . . . . . . . . . . . . . . . . . . . . Ø35mm . . . . . . . . . . . . . . . . . . . . . . . . . . .Ø35mm
Weight . . . . . . . . . . . . . . . . . . . . . 16kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19kg
SmS8
SmS8
,
SmS10
SmS10
Original Language Version
SmS12
SmS12
SMS8, SMS10, SMS12
issue: 2 - 22/03/10
Advertisement
