User Manual BDS4622V/R and BDS4624R
5.4
1 Slide out the battery cover.
2 Insert the two batteries (UM4).
3 Install the battery cover back to the remote control.
5.5
■
■
■
Notes for remote controller maintenance:
●
Upper
●
0
20
●
0
20
Lower
BATTERY INSTALLATION
Note:
Ensure that the polarity is as indicated by (+) and (-) inside the
battery compartment.
EFFECTIVE RANGE OF REMOTE CONTROLL
Point the remove controller at the signal receiver (power indicator)
on the front panel of your plasma display.
Do not block the signal receiver (power indicator) on the front panel
of your plasma display.
The effective range of remote controller is 10M, 30° left and right
and 20° up and down, as shown above.
Avoid impact, falling or dropping of remote controller. Keep remote
controller dry and out of heat source.
Do not clean remote controller with volatile solvents (e.g. benzene
or thinner).
Check battery level when remote controller does not work
properly.
22