Timer Recording - Philips CCC134 Owner's Manual

Checking or Clearing Timer Recordings
1
With the TV/VCR on, press the COMBI button, then
press the MENU button.
2
Press the PLAY/ button or the STOP/
VCR PROGRAM, then press the F.FWD/B button.
3
Press the PLAY/ button or the STOP/
PROGRAM REVIEW, then press the F.FWD/B button.
The timer recording information for the program in the lowest
numbered position will appear on the screen. If no timer record-
ings are programmed, nothing will happen when you select PRO-
GRAM REVIEW and press the F.FWD/B button.
4
Press the F.FWD/B button to display information about
the next timer recording. (If you do not press a button within
10 seconds, information about the next timer recording will
appear automatically.) This will continue until all positions have
been displayed. Then, the menu will disappear. You can exit the
Program Review at any time by pressing the STATUS/EXIT but-
ton.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Repeat steps 1-4 to make sure you cleared the correct
recording.
Timer Recording (cont'd) 37
1
button to select
button to select
• With ShowGuard, you don't have to
worry about losing your timer
recordings. If the power fails, timer
recordings will be restored when the
clock is reset. (The clock will reset
itself automatically if you are using
AUTO CLOCK. Details are on pages
14-17. If you are not using AUTO
CLOCK, reset the clock manually.
Details are on pages 12-13.) The
timer recording will not occur only if
it was scheduled to take place dur-
ing the power failure.
5 2-4
EJECT
POWER
STATUS
MENU CLEAR FM
/EXIT
1 2 3
4 5 6
7 8 9
SLEEP/
WAKE UP ALT.CH
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
CH. VOL.
MUTE
CABLE SMART
COMBI PICTURE
/DBS
VCR PLUS+
SPEED MEMORY
F.ADV SLOW
ENTER
TRACKING VAR.SLOW
INDEX SKIP
SEARCH
Helpful Hint