Fm Radio 59 - Philips CCC134 Owner's Manual

Follow the steps below to listen to FM radio stations through the
TV/VCR.
1
Press the COMBI button, then press the FM button to
select FM mode. The radio frequency appears on the TV/VCR
screen, moving around the screen every few seconds.
FM 88.0MHz
2
Press the CH(annel) o o / / / p p buttons until your desired radio
frequency appears. You can choose FM stations within the band
range of 88.0 ~ 108.0 MHz. You may get better FM reception by
repositioning the TV/VCR.
3
To exit FM mode and return to TV mode, press the FM
button again.
Switching the Antennas
If you receive a weak radio signal, you may go to TV mode and
switch between the internal (INT) and external (EXT) antennas.
When you select the external antenna, make sure your TV antenna
or TV cable signal is connected to the ANT(enna) Jack on the
TV/VCR. Details are on page six.
To switch the antennas, follow these steps.
1
Press the COMBI button, then press the FM button to return to TV
mode if necessary.
2
Press the MENU button.
3
Press the PLAY/ button or the STOP/
ANTENNA.
4
Press the REW(ind)/{ button or the F.FWD/B button to select
INT or EXT.
5
Press the STATUS/EXIT button.
button to select FM

FM Radio 59

Choosing FM stations...
EJECT
POWER
STATUS
MENU CLEAR FM
/EXIT
1 2 3
4 5 6
7 8 9
SLEEP/
WAKE UP ALT.CH
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
2
STOP
CH. VOL.
MUTE
CABLE SMART
COMBI PICTURE
/DBS
SPEED MEMORY VCR PLUS+
F.ADV SLOW
ENTER
TRACKING VAR.SLOW
INDEX SKIP
SEARCH
Helpful Hints
• If you turn off the TV/VCR in FM
mode, the TV/VCR will be in TV
mode when you turn on the TV/VCR
again.
• You cannot record the FM station.
• You cannot switch to FM mode dur-
ing tape playback, although tape
playback is allowed while in FM
mode.
• You must be in TV mode in order to
select Line Input mode (A/V IN).
1,3