Wake Up Timer 53 - Philips CCC134 Owner's Manual

The Wake Up Timer turns on the TV/VCR automatically at a speci-
fied time within the next 24 hours. You may set the TV/VCR to turn
on at a TV channel (the channel at which the TV/VCR was set last)
or with VCR playback. To set the Wake Up Timer, follow the steps
below. Before you begin:
Set the clock. If the clock is not set, CLOCK MUST BE SET will
appear on the screen at step 2. Then the SET CLOCK menu will
appear. Details are on pages 12-17.
Put a tape in the TV/VCR if you want the TV/VCR to start tape
playback at the specified time.
Make sure no timer recordings are set for the time at which you
want the TV/VCR power to come on.
1
Press the COMBI button, then press the SLEEP/WAKE UP
button.
TO ADJUST PRESS { / B
–TIMER–
SLEEP
> OFF
WAKE UP
ON-TIME
2
Press the PLAY/o o button or the STOP/p p button to select
WAKE UP. Then, press the REW(ind)/s s button or the
F.FWD/B B button to select TV ON or VCR ON.
TO ADJUST PRESS { / B
–TIMER–
SLEEP
WAKE UP TV ON
>
ON-TIME
3
Press the PLAY/o o button or the STOP/p p button to select
ON-TIME. Then, press the REW(ind)/s s button or the
F.FWD/B B button to select your desired wake up time. Each
press of the F.FWD/B B button or the REW(ind)/s s button will
increase (or decrease) the time by 10 minutes.
TO ADJUST PRESS { / B
–TIMER–
SLEEP
WAKE UP
12:00 AM
> ON-TIME
4
Press the STATUS/EXIT button.
5
Press the POWER button to turn off the TV/VCR. The
TV/VCR will turn itself on at the specified time.

Wake Up Timer 53

4
EJECT
POWER
STATUS
MENU CLEAR FM
/EXIT
1 2 3
4 5 6
7 8 9
1
SLEEP/
WAKE UP ALT.CH
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
CH. VOL.
MUTE
CABLE SMART
COMBI PICTURE
/DBS
VCR PLUS+
SPEED MEMORY
F.ADV SLOW
ENTER
TRACKING VAR.SLOW
INDEX SKIP
SEARCH
2-3
Helpful Hint
• To cancel the Wake Up Timer, fol-
low step 1 above. At step 2, press
the REW(ind)/s s button or the
F.FWD/B B button to select OFF at
WAKE UP. Press the STATUS/EXIT
button.
5