ENGLISH
3.2. Secure the handle by tightening the locking screw supplied. Use a screwdriver or a coin.
3.3. Insert the floor brush (13) to the brush connector (15), until it clicks into position.
OPERATION
1. Vacuuming
The cleaner equipped with a lot of accessories, and these accessories can be used in various combinations,
depending on the task: stick mode and hand-held mode.
1.1 Stick mode
Stick mode can clean the floors and carpets etc.
1) You should regularly check that the floor nozzle, wheels are clean in order to avoid scratching sensitive floors.
2) Pushing the ON/OFF button (1) to start the cleaner, then you can use the cleaner. When you want to stop the
operation, only push the button again to stop the cleaner.
4