Miele PW 6065 Vario Instructions Manual page 10

Commissioning the machine
10
1 Cottons Uni.
2 Minimum iron
3 Delicates
4 Woollens H
To finish the commissioning process completely, a first wash
programme must be started.
If the power to the machine is switched off before the first
wash programme is started (e.g. by pressing the K
button), the commissioning process can be carried out
again. The commissioning process does not need to be
carried out again once a wash programme that is longer
than 20 minutes has been run.
– 2. Start the first wash programme
For safety reasons, spinning is not possible until the first
wash programme has been run. To activate the spinning
function and to complete the commissioning process, you
must run a wash programme without laundry and without
detergent.
^ Open the taps.
^ Select Cottons 60°C and confirm your selection.
The main menu for Cottons Universal will then appear.
^ Press the flashing Start button.
After this programme has finished, the washer-extractor is
ready for processing laundry.
60°C Programme selection...
40°C Settings F...
40°C
15:00
30°C