Model Type Setting - Pioneer PRV-9200 Service Manual
Hide thumbs
Also See for PRV-9200:
- Operating instructions manual (124 pages) ,
- Frequently asked questions (4 pages) ,
- Brochure & specs (8 pages)
Advertisement
1
2. MODEL TYPE SETTING
• The Setup is Necessary When :
a) When the MAIN Assy is replaced
A
b) When the JCKB Assy is replaced
c) When the MAIN Assy and JCKB Assy are replaced
• How to Setup the Model
1) After power on, the following screen is displayed on TV monitor.
Press " 27 " by using the remote control unit for service(GGF1381).
[ Recorder 's Model Setting]
Input the number by using the remote for Service.
> --
B
Input No.
[
27
2) After 1), the following screen is displayed on TV monitor.
Press " 011 " by using the remote control unit for service.
[ Recorder 's Type Setting]
Input the number by using the remote for Service.
> ---
Input No.
C
[
01
The setting complete when OSD is disappeared.
3) Unplug the power cable.
4) Reset the recorder to all its factory settings.
1. Make sure that the recorder is on.
2. Press and hold [STOP] and press [STANDBY/ON] key on the front panel.
The recorder turns off with all settings reset.
5) Enter the Service Mode and then confirm the Model Name " PRV-9200/KU/CA ".
D
1. Make sure that the recorder is on.
2. Press [ESC] then [DISP] keys by using the remote control unit for Service.
PRV-9200/KU/CA
VERSION : 1.∗ ∗
SYSCON
: RELEASE_154
Rev
TUFLCON
: 1.22
DRIVE
: DVD-RW DVR-107X
1.16E
CKT0000353WL
: ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ (*1)
HDD
DEVICE
: PRISM-PLUS
E
REGION
: 1
: ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
C
FLASH
: 64M
6) Escape the Service Mode. Press [ESC].
7) Download the latest firmware.
At last, the download is necessary to update the firmware of each ASSY.
Refer to "7.1.3 DOWNLOAD METHOD" of RRV2963 on page 77.
Notes :
1) After the setting complete, you can NOT CLEAR the setting data.
Make sure the pressing number.
2) " NG " is appeared on TV when unsuitable number is pressed.
F
In such a case, please unplug the power cable and plug it again. Then restart the model setting.
4
1
2
Model
: PRV-9200
]
(Type -- , Region No. -)
Type
:
KU/CA
<US>
]
:1.5102.2.3
$
MASK
OK
OK
OK
OK
160
2
3
Note : Make sure of setting the correct number.
(*1) : HDD part No. depends on the models.
PRV-9200
3
4
4
Advertisement
