SBIG STX Series Operating Manual page 2

Note: This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the receiver and the equipment.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded I/O cables must be used when operating this equipment.
You are also warned, that any changes to this certified device will void your legal right to operate it.
OPERATION Manual for STX Series
Cameras Revision 1.3
Dec 2016
CAUTION:
Never "hot plug" the HDMI cable or I2C cable when camera power is connected.
Always turn the power turned OFF before connecting or disconnecting the HDMI or I2C cables.
2