Specifications; Standard Accessories - Hitachi M 12V (S) Handling Instructions Manual

English

SPECIFICATIONS

Model
Voltage (by areas)*
Power Input*
Collet Chuck Capacity
No-load speed
Main Body Stroke
Weight (without cord and

standard accessories)

*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
1. Model M12V(S), M12SA(S)
(1) Straight Guide ........................................................... 1
(2) Bar Holder .................................................................. 1
Feed Screw ................................................................ 1
Wing Bolt ................................................................... 1
(3) Template Guide ......................................................... 1
(4) Wrench ....................................................................... 1
(5) Straight Bit (Tungsten Carbide) ............................... 1
8 × 8 ............................ 1 12 mm Cellet Chuck
1/2" × 1/2" ................... 1 1/2" Collet Chuck
(6) Chuck Sleeve ............................................................. 1
8 mm .......................... 1 12 mm Collet Chuck
1/4" ............................. 1 1/2" Collet Chuck
(7) Wing Bolt (A)
(M6 × 15, for mounting the guide bars) ................... 2
(8) Lock Spring (for mounting the guide bars) ............. 2
NOTE
Based on the kind of collet chuck, 12 mm type or 1/2"
type, either straight bit and chuck sleeves are attached.
2. Model M8V(S), M8(S)
(1) Parallel Guide ............................................................ 1
(2) Template Guide ......................................................... 1
(3) Wrench ....................................................................... 1
(4) Wing Bolt (A)
(M6 × 15, for mounting the guide bars) ................... 2
(5) Lock spring (for mounting the guide bars) ............. 2
Standard accessories are subject to change without notice.
OPTIONAL ACCESORIES - sold separately
1. Model M12V(S), M12SA(S)
(1) Chuck Sleeve
26 mm
27
M12V(S)
(110V, 115V, 120V, 127V, 220V, 230V, 240V)
1850 W
12 mm or 1/2"
8000—20000/min 22000/min
62 mm
5.3 kg
M12SA(S) M8V(S)
1600 W
10000—25000/min
5.2 kg 2.8 kg
D d
6 mm
8 mm
12 mm
1/4"
3/8"
1/4"
3/8"
1/2"
10 mm
(2) Trimmer Guide (Fig. 18 V )
2. Model M8V(S), M8(S)
(1) Chuck Sleeve
20 mm
D d
1/4"
8 mm
6 mm
(2) Trimmer Guide (Fig. 21 V )
(3) Feed Screw Ass'y (Fig. 21 W )
M8(S)
800 W
8 mm or 1/4"
25000/min
50 mm
2.7 kg
Shape of chuck sleeve
No groove
1 groove
2 groove
No groove
Shape of chuck sleeve
No groove
1 groove