HP MSR Series Configuration Manual page 56
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Router B.
[RouterB-Ethernet1/1] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that in VRRP group 1, Router A is the master and Router B is a backup. Packets from Host
A to Host B are forwarded through Router A.
# Shut down the uplink interface Ethernet 1/2 on Router A.
[RouterA-Ethernet1/1] interface ethernet 1/2
[RouterA-Ethernet1/2] shutdown
After shutting down the uplink interface on Router A, you can still successfully ping Host B on Host A. Use
the display vrrp command to view information about VRRP group 1.
# After shutting down the uplink interface on Router A, display detailed information about VRRP group
1 on Router A.
[RouterA-Ethernet1/2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
: 1
Adver Timer
: Up
State
: 110
Running Pri
: Yes
Delay Time
: None
: 10.1.1.10
: 0000-5e00-0101
: 10.1.1.1
: 1
State : Positive
: Standard
: Virtual MAC
: 1
: Up
: 100
: Yes
: 2200ms left
: None
: 10.1.1.10
: 10.1.1.1
: Standard
: Virtual MAC
: 1
Adver Timer
: Up
State
: 110
Running Pri
: Yes
Delay Time
: 2200ms left
: None
: 10.1.1.10
52
: 1
: Master
: 110
: 0
Adver Timer
: 1
State
: Backup
Running Pri
: 100
Delay Time
: 0
: 1
: Backup
: 80
: 0
Pri Reduced : 30
Advertisement
Table of Contents
