HP MSR Series Configuration Manual page 116

Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Become Master
Auth Type
Virtual IP
Member IP List : FE80::3 (Local, Backup)
Forwarder Information: 3 Forwarders 2 Active
Config Weight
Running Weight : 255
Forwarder 01
State
Virtual MAC
Owner ID
Priority
Active
Redirect Time
Time-out Time
Forwarder 02
State
Virtual MAC
Owner ID
Priority
Active
Forwarder 03
State
Virtual MAC
Owner ID
Priority
Active
Forwarder Weight Track Information:
Track Object
The output shows that when Ethernet 1/2 on Router A fails, the weight of the AVF on Router A
decreases to 5, which is lower than the lower limit of failure. All VFs on Router A turn to initialized
state and cannot be used for packet forwarding. The VF corresponding to MAC address
000f-e2ff-4011 on Router C becomes the AVF, and Router C takes over Router A for packet
forwarding.
# When the timeout timer (about 1800 seconds) expires, display the detailed information about
VRRP group 1 on Router C.
[RouterC-Ethernet1/1] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Ethernet1/1
VRID
Admin Status
Config Pri
: 4200ms left
: None
: FE80::10
1::10
FE80::1 (Master)
FE80::2 (Backup)
: 255
: Active
: 000f-e2ff-4011 (Take Over)
: 0000-5e01-1101
: 85
: local
: 93 secs
: 1293 secs
: Listening
: 000f-e2ff-4012 (Learnt)
: 0000-5e01-1103
: 85
: FE80::2
: Active
: 000f-e2ff-4013 (Owner)
: 0000-5e01-1105
: 255
: local
: 1
State : Positive
: Load Balance
: Virtual MAC
: 1
Adver Timer
: Up
State
: 100
Running Pri
112
Weight Reduced : 250
: 100
: Backup
: 100

Advertisement

Table of Contents
loading

Table of Contents