HP MSR Series Configuration Manual page 49

[RouterD] track 1 nqa entry admin test reaction 1
Verifying the configuration
# Display information about the track entry on Router A.
[RouterA] display track all
Track ID: 1
Status: Positive
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
# Display the routing table of Router A.
[RouterA] display ip routing-table
Routing Tables: Public
Destinations : 10
Destination/Mask
10.1.1.0/24
10.1.1.1/32
10.2.1.0/24
10.3.1.0/24
10.3.1.1/32
20.1.1.0/24
20.1.1.1/32
30.1.1.0/24
127.0.0.0/8
127.0.0.1/32
The output shows the NQA test result: the master route is available (the status of the track entry is Positive),
and Router A forwards packets to 30.1.1.0/24 through Router B.
# Remove the IP address of interface Ethernet 1/1 on Router B.
<RouterB> system-view
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] undo ip address
# Display information about the track entry on Router A.
[RouterA] display track all
Track ID: 1
Status: Negative
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
# Display the routing table of Router A.
[RouterA] display ip routing-table
Routing Tables: Public
Routes : 10
Proto Pre Cost
Direct 0 0
Direct 0 0
Static 60 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Static 60 0
Direct 0 0
Direct 0 0
45
NextHop Interface
10.1.1.1 Eth1/1
127.0.0.1 InLoop0
10.1.1.2 Eth1/1
10.3.1.1 Eth1/2
127.0.0.1 InLoop0
20.1.1.1 Eth1/3
127.0.0.1 InLoop0
10.1.1.2 Eth1/1
127.0.0.1 InLoop0
127.0.0.1 InLoop0