Table of Contents
Advertisement
Mag Plus Probe Installation Kits
The Mag Plus Probe Installation kit.
These two wires connect in the J-box or splice kit
to the two field wires from the console.
Probe cable connector
(attaches to threaded connector
on the top of probe canister)
Cable
Boot
Cable Seal Kit
031-15
Sleeves
Figure 3. Mag Plus Probe Installation Kit 846402
Cable tie
Wire Nuts
Figure 4. Cable Seal Kit
Product float
Adapters
Water float (optional)
2-Inch Floats
Product float
Note: your Mag Probe installation kit will contain
1-inch, 2-inch, 3-inch or 4-inch floats and either
adapters or sleeves as per your order.
Water float (optional)
1-Inch Floats
Barrel, sleeve & end caps
Encapsulant pack
7
Product float
Water float (optional)
3- or 4-Inch Floats
031-11
Advertisement
Table of Contents
