The Basics; Power On Or Off; Play Or Pause Audio; Skip To Next Track - Plantronics BackBeat GO 3 User Manual

The Basics

Power on or off

Play or pause audio

Skip to next track

Play previous track

Adjust the volume

Answer or end a call

Mute

Use call waiting

Pair multiple devices

Restore factory settings

Press the center button until you hear "power on." To power off, press the center button for 4
seconds until you hear "power off."
Tap the center button.
Press the Volume up (+) button for more than 1 second.
Press the Volume down (–) button for more than 1 second to restart the current track. Press the
button twice (each press more than 1 second) to go to the previous track.
Tap the Volume up (+) or down (–) button.
Tap the center button.
During a conversation, simultaneously tap the Volume up (+) and down (–) buttons. You will hear
"mute on" or "mute off." An alert repeats every 5 minutes when mute is on.
First, tap the center button to put the first call on hold and answer the second call. To switch
between calls, press the center button for 2 seconds. To end the second call and retrieve the first
call, tap the center button.
Your earbuds can pair with up to eight devices but only maintain one connection.
To enter pair mode after the first pairing process, start with the earbuds powered off. Press and
1
hold the center button until you hear "pair mode" and the LED on the right earbud flashes red and
blue.
Download and use the BackBeat GO 3 Companion app to manage your connection and switch
2
devices.
When you restore the earbuds to its factory settings, the paired devices list is deleted.
First, put the earbuds in pairing mode. Choose from the following:
1
• With the earbuds powered off, press and hold the Audio/call button until you hear "pair mode" or
• With the earbuds powered on and not during a call, press and hold the Volume up (+) and Volume
down (–) buttons until you hear "pair mode"
The indicator light, on the right earbud, flashes red and blue to indicate pairing mode.
Second, while the earbuds are in pairing mode, press and hold the Volume up (+) and Volume
2
down (–) buttons until the LED flashes purple.
8