New Password'.
. Enter again your new password and banner will display 'Pin Code
Changed'.
. Press the OK key on the remote control.
. Press the Return/Exit key 3 times to return to normal TV viewing.
SW Update: To enable firmware updates that may occur in the future.
Set Default: Returns the receiver to its factory default settings
. In the SET DEFAULT page, press the Down arrow key to select Set
Default.
. Press the OK key on the remote control and banner will display 'Set
Default'.
. Press the Left arrow key to select 'O' and press the OK key; unit will now
revert back to factory default settings and Installation banner will be
displayed prompting Auto Scan.
NAVI KEY FUNCTIONS
Press the NAVI key on the remote
control and 8 menu symbols will be
listed at the bottom of the screen.
Navi Key – TV Guide
. Press the Left/Right arrow key on the
remote control and select TV
Guide.
. Press OK Key on the remote control and TV Channel list and channel
program names will be displayed.
. Press the RED key on the remote control to select Page Up list of
channels.
. Press the BLUE key on the remote control to select Page Down list of
channels.
Navi Key – TV List
. Press the Left/Right arrow key on the remote control and select TV List.
. Press Ok key on the remote control and beneath the group heading
'Visible', all TV channels will be listed as well as program viewing of the
21