Start Up; Time Zone 1 - healing HHH640 Operating Manual

START UP

Once you have made your video connection to the HHH640 and to your TV,
connected the antenna, IR Extender and Power Pack, please action the
following Start Up procedure:-
. Power On the HHHH640 and a healing
banner will be displayed for a few
seconds and - - - will appear in the units
orange LED display.
. INSTALLATION page will now display
with AUTO SCAN highlighted.
. Push the OK key on the remote control,
Auto Scan will commence.
. The receiver will scan and then save
the TV & Radio channels in your
location and this will take a few
minutes.
. Once all channels have been scanned,
the receiver will automatically revert to
normal TV viewing.
TIME ZONE (For your Location)
It is important to set up your STATE so
that the Time signal automatically
generated by the broadcaster is properly
corrected for your location.
VIC is the default in the unit. To select
your State, please action the following:-
. Press the Menu key on the remote
control and SET UP & MORE page will
display.
. Press the Up/Down arrow keys on the
remote control and select SET UP.
. Press the Left/Right arrow keys on the
remote control to locate SET UP in the
middle of the screen.
. Press the OK key on the remote control
and SET UP page will be displayed.
. You will note 7 menu symbols at the top
of the page.
11