Table of Contents
Advertisement
SA-AK633P
spread the hold bars of loading stopper and remove the
UP/DOWN base.
[Installation for loading stopper ass'y]
Step 1 Align the claw of loading stoppers ass'y with the slot of
spindle base. (Caution should be exercised when alignment of
claw due to the size of claws.)
Step 2 Lower the loading stopper ass'y, and then align the
lower spindle with the trapezoid tooth of relay gear A.
Step 3 Force the loading stopper ass'y, latch the claw firmly.
[Reassembly for mechanism base drive unit]
Step 1 Install the traverse cam gear.
Step 2 Rotate the traverse cam gear to the direction of arrow.
Step 3 Install the drive gear and traverse relay gear.
*When installing the traverse relay gear, align the trapezoid
tooth of gear with tooth of traverse cam gear.
32
Advertisement
Table of Contents
