GigaPan Epic Pro User Manual page 16

To charge the battery on its own:
1. To remove the battery from the EPIC Pro , open the battery compartment by flipping
the latch counter-clockwise.
2. Plug the connector end of the power cord into the battery and then plug the power
cord into an AC wall socket.
3. Place the battery level in a space that has ample ventilation.
A light on the power cord will blink red until charged. A blinking green light signals
that the battery is now charged and ready to use.
To check the EPIC Pro battery status:
When the battery is low, a low battery icon will flash in the lower right corner of the
EPIC Pro LCD display. When the battery is so low that proper functionality is no longer
possible, a "Please recharge the battery" message will appear.
To check the battery status, press the directional keys until you reach the 'Options'
menu item and press OK. Select the 'Battery Status' menu item and press OK. If the
battery has just been charged, the battery status should read at least 7.4 volts. If the
battery is below 7.0 volts, it needs to be charged.
Power cord
Battery
Setting up the GigaPan EPIC
Charger LED light
Battery Latch
13