Smartwave Display Functions; 3 In 1 Gauge; Volt And Trans Temp Gauges; Smartire Smartwave Ffd - MCi J4500 Operator's Manual

3-in-1 Gauge:
Figure 9. 3 in 1 Gauge
Fuel - This gauge reads the fuel level in the tank.
Diesel Exhaust Fluid ( DEF ) - The DEF gauge
reads the fluid level in the tank.
Engine Tachometer - The engine tachometer
reads engine revolutions per minute.
Figure 10. Volt and Trans Temp Gauges
Voltmeter - The voltmeter reads the condition of
the 24-volt electrical system. The gauge is calibrated
in volts. The needle should be from 27 to 29 volts. If
below 27 volts, the batteries are undercharging. If
above 29 volts, the batteries are overcharging. Have
the system checked if over- or undercharging. The
LED lights when voltage is too low.
Transmission Temperature - This gauge reads
transmission oil temperature in farenheit.
12
Figure 11. SmarTire SmartWave FFD
SmarTire SmartWave Full Function Display -
The SmartWave tire monitor system provides tire
pressure deviation alert, low pressure warning and
high temperature alert for all tire positions.

SmartWave display functions:

1. ALARM tell-tale light to alert driver.
2. Display screen shows alert icons, tire location
and numerical unit of pressure or temperature.
3. Control buttons to scroll through display.
June 2016