PRE-TRIP INSPECTION,
INTERIOR / EXTERIOR LIGHTING
Before the Pre-Trip Inspection function is
enabled, these functions must be met:
•
Position the Master Power switch to the
"ON" position,
•
Select "NEUTRAL" on the transmission
Shift Pad selector,
•
Set the Park Brake,
•
Position the Reading Light test switch to
the "ON" position.
•
Apply and hold a service brake
application of 60 psi,
Only after these conditions are met, the Pre-Trip
Inspection function is enabled, automatically activating
all interior / exterior coach lighting and dash tell-tale
lights and buzzer will activate for two (2) minutes.
The back-up lights do not illuminate during
the Pre-Trip Inspection.
The Pre-Trip Inspection function can be
canceled by positioning the Reading Light
test switch to "OFF", or positioning the
Hazard switch to "ON".
8
ANTI-THEFT PRECAUTIONS
1. Do not leave the coach unattended with the
engine running.
2. Park in a lighted spot when possible.
3. Fully close all windows and doors.
4. Keep valuable items out of sight.
5. Press the Step-well light switch to the OFF
position ( anti-theft feature ).
6. Lock out the battery disconnect switch
June 2016